200MW Mechanical Joint Ductile Iron Gate Valve- AWWA Certified

200MW Mechanical Joint Ductile Iron Gate Valve- AWWA Certified

• Gate Valve-Mechanical Joint Ends
• 200 CWP- Max. Temp. 180° F.
• AWWA C550 Fusion Bonded Epoxy
• EPDM Resilient Wedge
• Bolted Bonnet
• Non Rising S.S. Stem
• 304 S.S. Bonnet & Operating Nut Bolts
• Supplied with 2" Square Operating Nut
• Manufactured to AWWA C509-15
• Mechanical Joint Ends Conform with AWWA C111/A21.11
• Open Right Available
• Sizes 3" - 12"


Material Specifications

No Part Material
1 Valve Body Ductile Iron ASTM A536
2 Resilient Wedge Ductile Iron ASTM A536/ EPDM ASTM D2000
3 Stem Nut Bronze ASTM B584
4 Stem Stainless Steel AISI 410
5 Bonnet Ductile Iron ASTM A536
6 Stem Primary O-Ring EPDM ASTM D2000
7 Stem Gasket NYLON 1010
8 Gland Seal O-Ring EPDM ASTM D2000
9 Stem Secondary O-Ring EPDM ASTM D2000
10 Stem Seal Bushing NYLON 1010
11 Packing Gland Ductile Iron ASTM A536
12 Wiper Ring EPDM ASTM D2000
13 Operating Nut Cast Iron ASTM A126-B
14 Washer Stainless Steel AISI 410
15 Bolts Stainless Steel AISI SS304
16 Gland Bolts Stainless Steel AISI SS304
17 Bonnet Gasket EPDM ASTM D2000
18 Bonnet Bolts Stainless Steel AISI SS304

Dimensions 

Part # OP. Nut Part # Open Right Size (DN) L B F D E H G
200M10W 200M10RW 3” 8.00 4.94 7.63 4.06 8.35 12.85 0.95
200M11W 200M11RW 4” 9.02 6.02 9.13 4.91 9.69 14.18 1.02
200M13W 200M13RW 6” 10.50 8.13 11.07 7.01 13.00 17.61 1.06
200M14W 200M14RW 8” 11.50 10.28 13.32 9.16 16.15 20.92 1.10
200M15W 200M15RW 10” 13.00 12.35 15.63 11.21 13.00 17.61 1.18
200M16W 200M16RW 12” 14.00 14.45 17.90 13.31 16.15 20.92 1.26

 

 

Back to Top
Copyright © 2004-2024 Matco-Norca. Website Design and Development by AIMG. Site Map | Privacy Policy