Matco-Norca : Valves & Specialties : Resilient Wedge Cast Iron Gate Valves

	Brass & Bronze Valves
		Ball Valves
		Gate Valves
		Check Valves
		Y Strainers
		Globe Valves
		Gas Valves
		Garden Valves
		Radiator Valves
		Supply Valves
		Back Flow Preventers
		Float Valves
		Oil Tank Valves
	Low Pressure Valves
		Aztec Low Pressure Valves
		Boiler Drains
		Sillcocks
		Stop Valves
		Stop & Waste Valves
		Hose Bibbs
	Cast & Ductile Iron Valves
		Butterfly Valves
		Cast Iron Gate Valves - IBBM
		Cast Iron Gate Valves - Resilient Wedge
		Cast Iron Check Valves
		Cast Iron Y-Strainers
		Cast Iron Globe Valves
		Ductile Iron Gate Valves
	PVC Valves
		PVC Ball Valves
		PVC Check Valves
		Non-Metallic Valves
		PVC Couplings
	Specialties
		CLAMPÉTTE PRODUCTS
		Cast Iron Drainage Products
		Cast Iron Flanges
		Cleanouts
		Compression Couplings
		Plumbing Specialty Valves
		Teflon & Electrical Tape

Track Your Matco-Norca Shipments By Clicking Here

Cast Iron Gate Valves - Resilient Wedge

Operations & Maintenance Manual for Cast Iron Resilient Wedge Gate Valves

200W

• ISO-9002
• Gate Valve-Flanged Ends
• 200 CWP-Max. Temp. 140 Deg. F.
• Fusion Bonded Epoxy Coating
• Resilient Wedge
• Non Rising 304 S.S. Stem
• 321 S.S. Bonnet & Operating Nut Bolts
• Handwheel Standard or Operating Nut Optional
• Meets AWWA C-509 Standard
• Flanged Ends Conform with ANSI B16.1
• Sizes: 2" - 12"

Spec Sheet

200M

• ISO-9002
• Gate Valve-Mechanical Joint Ends
• 200 CWP-Max. Temp. 140 Deg. F.
• Fusion Bonded Epoxy Coating
• Resilient Wedge
• Non Rising 304 S.S. Stem
• 321 S.S. Bonnet & Operating Nut Bolts
• Supplied with 2" Square Operating Nut
• Meets AWWA C-509 Standard
• Mechanical Joint Ends Conform with AWWA C111/A21.11
• Sizes 3" - 12"

Spec Sheet

200FJ

• ISO-9002
• Gate Valve-Flanged x Mechanical Joint Ends
• 200 CWP-Max. Temp. 140 Deg. F.
• Fusion Bonded Epoxy Coating
• Resilient Wedge
• Non Rising 304 S.S. Stem
• 321 S.S. Bonnet & Operating Nut Bolts
• Supplied with Handwheel or Operating Nut
• Meets AWWA C-509 Standard
• Flanged End Conforms with ANSI B16.1
• Mechanical Joint End Conforms with AWWA C111/A21.11
• Sizes 3" - 12"

Spec Sheet

100W

• ISO-9002
• Gate Valve-Flanged Ends
• 200 CWP-Max Temp. 140 Deg. F.
• 3 Bosses w/1 Tapped & Plugged
• Fusion Bonded Epoxy Coating
• Resilient Wedge
• Non Rising Bronze Stem
• Full Port Flow
• Supplied with Handwheel or Operating Nut
• Meets AWWA C-509 Standard
• Flanged Ends Conform with ANSI B16.1
• Sizes: 14" & 16", for sizes 2"-12" use the 200W valve

COMING SOON

100RT

• ISO-9002
• Gate Valve-Ring Tite Gasket Ends
• 200 CWP-Max. Temp. 140 Deg. F.
• Fusion Bonded Epoxy Coating
• Resilient Wedge
• Non Rising 304 S.S. Stem
• 321 S.S. Bonnet & Operating Nut Bolts
• Supplied with 2" Square Operating Nut
• Meets AWWA C-509 Standard
• Gasketed Ends for (IPS) PVC O.D. Pipe
• Sizes 3" - 8"

Spec Sheet

10RT

• ISO-9002
• Gate Valve-Ring Tite Gasket Ends
• 200 CWP-Max. Temp. 140 Deg. F.
• C.I. Body w/3 Bosses w/1 Tapped & Plugged
• Resilient Wedge
• Non Rising 304 S.S. Stem
• Full Port Flow
• Supplied with Operating Nut
• Epoxy Coating
• ASTM A126 Class B
• Gasketed Ends for (IPS) PVC O.D. Pipe
• Sizes 2" - 8"

Spec Sheet

10RW

• ISO-9002
• Gate Valve-Flanged Ends
• 200 CWP-Max. Temp. 140 Deg. F.
• C.I. Body w/3 Bosses w/1 Tapped & Plugged
• Resilient Wedge
• Non Rising 304 S.S. Stem
• Full Port Flow
• Epoxy Coating
• ASTM A126 Class B
• Flanged Ends Conform with ANSI B16.1
• Sizes 2" - 8"

Spec Sheet

10RS

• ISO-9002
• Gate Valve-Threaded
• 200 CWP-Max. Temp. 140 Deg. F.
• C.I. Body
• Resilient Wedge
• Non Rising 304 S.S. Stem
• Full Port Flow
• Epoxy Coating
• ASTM A126 Class B
• Threaded Ends Conform to ANSI B1.20.1
• Sizes 2" - 8"

Spec Sheet

100M

• ISO-9002
• Gate Valve-Mechanical Joint
• 200 CWP-Max Temp. 140 Deg. F.
• 3 Bosses w/1 Tapped & Plugged
• Fusion Bonded Epoxy Coating
• Resilient Wedge
• Non Rising Bronze Stem
• Full Port Flow
• Supplied with Operating Nut
• Meets AWWA C-509 Standard
• Mechanical Joint Ends Conform with AWWA C111/A21.11
• Sizes 3" - 16"

Spec Sheet

105U UL/FM

• ISO-9002
• Gate Valve-Flanged Ends
• 175 CWP-Max. Temp. 140 Deg. F.
• U.L. Listed / F.M. Approved
• N.Y.C. Approved (MEA257)
• 3 Bosses w/1 Tapped and Plugged
• Fusion Bonded Epoxy Coating
• Outside Screw & Yoke Rising Stem
• Resilient Wedge
• Sizes 2-1/2" - 12"

Spec Sheet

105W

• ISO-9002
• Gate Valve-Flanged Ends
• 200 CWP-Max. Temp. 140 Deg. F.
• 3 Bosses w/1 Tapped and Plugged
• Fusion Bonded Epoxy Coating
• Outside Screw & Yoke Rising Stem
• Resilient Wedge
• Meets AWWA C-509 Standard
• Sizes 3" - 16"

Spec Sheet